All sections present an
exceptionally clean and flush
exterior surface when closed with only ⅛" gap between glass sections.
Vent and exit sections utilize a
hidden hinge design
maintaining a flush automotive look.
All outside glass edges have a
full “pencil” edge for
safety and appearance.
4" radius for all outside glass corners enhances the
modern automotive look.
Vent section has an
easily removable bug screen and is
operated using a custom built, low-backlash scissor operator with the vent
opening limited to approximately four inches at the bottom.
Polyurethane bonding technology is used to bond the
stationary glass to the window frame eliminating the potential for leaks
No obtrusive outer frames are used in the emergency exit
Emergency exit models have a full 17"H x 24"W opening and
swing a full 90° providing a completely unobstructed opening.
No additional costs for installation tools or techniques
since standard clamp rings are used in the installation.
Uses a 1/2 thick Insulated glass panel. This system
utilizes a double moisture seal barrier to survive in the changing